Wide joint floor grout with an ivory limestone colour provides a secure fix on tiled floors with approx coverage 7.5m2 per bag. All you need to do is mix with water and apply to 3mm-20mm joints before letting the mixture set. The light colour is well suited to natural stone tiles of a similar shade like limestone or travertine. This combination creates a stylish stone floor perfect for bathrooms, kitchens, conservatories and even outdoor patios.
Premium quality one part flexible grout is easy to apply and suitable for grouting a variety of floor tiles including; Porcelain, Marble, Travertine, Limestone, Quartz, Ceramic, Granite and Slate. Our grout is waterproof making it perfect for shower areas and swimming pools. It is also compatible with underfloor heating. Wide Joint Floor Grout can be used in both internal and external areas.
Here’s how you use it:
Ensure the tiles are firmly fixed and the joints are clean before grouting. Firstly, add the grout powder to cold clean tap water and mix into a smooth, slightly stiff consistency, which can be done by hand or with a mechanical mixing paddle. Mix only a sufficient amount which can be used within one hour. Work the grout into the joints to make sure they are completely filled.
Make sure you clean surplus grout from the tiles and joints as soon as possible as set grout will prove difficult to remove later. Allow 24 hours before walking on the surface. If you have installed an underfloor heating system it is recommended that you do not apply heat until two days after grouting your tiles.
Instructions are given as a guideline only, for your specific project needs please follow full instructions given on the bag